Laser cleaning · equipment supply · export
Laser cleaning equipment for industrial distributors — 1.5 to 3 kW continuous wave and 100 to 300 W air-cooled pulsed. CE-tested as a family by an accredited third-party laboratory, shipped with the compliance file, the spare parts list and a lead time per item.
Why a trading company
A distributor's problem is rarely the machine. It is what happens when the quote, the certificate and the spare lens all come from the same place that also sets the price.
A plant with one platform will recommend that platform for a shipyard and for a mould shop alike. We spec the requirement first — 3 kW for mill scale on a hull, 200 W for tooling — and hold the manufacturer to it, not the other way round.
Pulsed units in this power class can fall under dual-use controls. Most factories will ship, and leave the licence question, the declaration parameters and the technical file to whoever buys. That gap is where shipments stop at customs.
A cleaning head is consumable-heavy: protective windows, nozzles, focus optics. If the reply to a spare parts request is "we will check with the factory", the distributor carries the delay. We quote lead times per item before the order.
See it work
No chemicals, no grit, no secondary waste stream. The layer leaves the surface; the substrate stays as it was machined.
What the video shows is the working distance and the scan pattern an operator learns in an afternoon — and the reason buyers ask for a sample cut on their own material before they commit.
Send us your part or your scrap piece and we will run it and film it. The video comes back with the parameters used — power, frequency, scan speed — so the result is reproducible on your floor.
Mill scale and rust removal on carbon steel. Parameters on request with the datasheet.
Product lines
Continuous wave removes volume — rust, paint, mill scale, coating. Pulsed removes thin layers without heating the substrate. Selling one as the other is the most common mistake in this category.
1,500 / 2,000 / 3,000 W
100 / 200 / 300 W air-cooled
Applications
In every case below, the purchase is not justified by the laser. It is justified by a process that is being banned, priced out, or is holding up the next stage of work.
Hull plates, deck structures and weld seams before coating. Replaces grit blasting inside enclosed spaces.
Mill scale and old coatings before welding and re-coating. No profile damage on thin sections.
Bogie frames, underframe corrosion, weld preparation on repair work.
Tower sections, flanges and bolted joints; service work where abrasives are impractical offshore.
Surface preparation in hazardous areas where grit and dust are not permitted.
Rebuild and resale preparation: removing rust and paint without media contamination.
Release agent, rubber residue and scale from tool steel without altering surface geometry.
Where continuous wave would distort the part: foils, shafts, coated assemblies.
OEM & private label
For distributors and service groups who want their own brand without building a supply chain around a single plant.
Power range, substrate, access and duty cycle. Written down before anything is quoted.
Two or three factories matched to the application, with the differences stated plainly, not hidden.
Badge, colour, manual and the CE technical file prepared for the entity placing it on the market.
Spares list, lead times and a named contact — the part most private-label deals leave out.
A UK machinery distributor is already white-labelling our 3 kW continuous wave units for its own fleet customers. We wrote the technical file, they put their name on the machine.
Reference available under NDA
Compliance
Two rules govern this category, and they are independent of each other. One decides whether the machine may leave China. The other decides whether it may be sold in the destination market. A supplier who only knows the first will get the goods to the port and no further.
We check both before quoting, in writing, per configuration.
Read how we handle it| Question | Where it is decided |
|---|---|
| Is the unit dual-use controlled? | Working mode, pulse width and beam characteristics — not wattage alone |
| Which licence applies? | Per end user, per shipment; resale structures change the answer |
| Can it carry CE? | Technical file and the entity placing it on the market |
| What changes in 2027? | EU 2023/1230 replaces 2006/42/EC from 20 January 2027 |
Next step
Specification sheets, configuration options and indicative pricing are sent on request. If the application does not fit either line, we will say so.
Request a spec sheet